This product is a dry concrete crack grout injection suitable for injection grouting on cracks between less than 0.1mm and 1mm as the viscosity is low- It is used for structures with frequent crack due to deterioration, structure requiring urgent reinforcement and repair due to oxidation, or when crack occurs in the structure due to a large amount of load on the structure during use.

Features

- Injection operation is very fast thanks to low viscosity

- It provides excellent penetrability in the concrete; thus increasing the surface strength on the crack site

- As it is non-toxic after curing, it can be applied to food storage, etc-

 - It is solvent-free, so there is neither shrinkage nor crack

 - Thanks to excellent penetrability and adhesiveness, injection penetrates the concrete surface and hardens when bonding, so there is no separation defect around the bonding

 - It has high tensile strength and outstanding water resistance, weatherproof property, chemical resistance, and durability 

Use

- Crack grout injection on the bridge and overpass

 - Crack grout injection of the building

 - Bonding separated site on the mortar surface

- Wide crack injection grout adhesive (between less than 0.1㎜ and 1㎜)

Storage

- Store in a dry place at room temperature of 20℃ with the lid completely closed.

- Products whose shelf life has expired shall be discarded chemically.

- Shelf life: 4 months in summer, 6 months in winter

Instructions for handling

- Don’t eat or smoke in the workshop.

- Be careful not to let the product come in contact with skin- In case of contact with skin, 

  wash thoroughly with neutral detergent.

- If you ingest the product, induce vomiting immediately and seek medical attention.

- Let the chief stationed permanently supervise and direct the work so that there are no 

  safety accidents.

- Persons other than workers are not allowed to access the workshop.

- Stop the work in case of rain or when the temperature is below 5℃.

- In case of rain, if the product is exposed to rain, water flows into the lid even if the lid is 

  closed, so store indoors 

  or cover with plastic bag when storing outdoors to prevent water from entering.  

- The construction site is marked with a safety sign, and access is prohibited during curing.

- Do not weld or use fire around the workshop.

- Cover the remaining product after use with a lid to prevent oxidation.

- Note that the pot life is short in summer and long in winter.